NETGEAR MR1100 Mobile Router - Static IP WAN
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
vvp25052025
- Posts: 2
- Joined: Sun May 25, 2025 6:49 am
- Has thanked: 0
- Been thanked: 0
NETGEAR MR1100 Mobile Router - Static IP WAN
hello. can you tell me if you can manually set the provider's external IP address for the netgear m1100 model via the console? and if so, what command? you need to specify an external IP address (manually). this is a requirement of the provider. that is, we are not talking about NATe, but about ipv4, which was issued by the provider. not by DHCP. you can't do this through the admin panel, but maybe you can use the console?
-
Rich Hathaway
- Posts: 678
- Joined: Mon Mar 08, 2021 2:41 pm
- Has thanked: 13 times
- Been thanked: 263 times
Re: NETGEAR MR1100 Mobile Router - Static IP WAN
You are trying to write the ipv4 ip? that gets assigned, I think the only way to do that is to hard code it via either root console or adb port, do you have it rooted, that device is a pain to root.
I think if you did hard code it it would/may get re-assigned upon service and/or may keep you from getting service or be a situation where only a few select webpages would open for you. Tell us why you want to write it, is it not getting assigned?
I think if you did hard code it it would/may get re-assigned upon service and/or may keep you from getting service or be a situation where only a few select webpages would open for you. Tell us why you want to write it, is it not getting assigned?
