Wireless Joint

On the DATA front my understanding is many cellular devices will keep working if they are LTE even if they are not on AT&T whitelist up until a IMEI sweep finds them In my case, such LTE devices had their speeds throttled to sub 100kbps and I had to call in to get the line "whitelisted&quo...

Look into US Mobile. Most any non-hotspot plan will require identity changes. Currently have us mobile for my personal cell phone use. They are a great company. Highly recommend them for discount cell phone use. However when it comes to data caps on Verizon it is a hard cap at 75gigs. After that th...

@Didneywhorl

I will try this today and report back ASAP. Thanks again for helping me trouble shoot this issue. I really appreciate you taking the time to help me. I hate living in rural area with no easy access to internet........

Hi All, While the LBR20 w/ Voxel firmware is still my daily driver, I have been working on a 5G build featuring the Quectel RM502Q-AE on a Raspberry Pi 4 for hardware using OpenWRT and ModemManager on the software side. Since github and markdown lent themselves a little better to hosting the build c...

@Didneywhorl

Update! The modem eventually connected. It just took about 10 minutes longer than normal. I will keep everyone posted on reliability of the T-Mobile sim in case it disconnects anymore. I hope all of this info helps the community. Didneywhorl is AWESOME!!!

Now personally never changed identity on Visible setups. Never changed identity on anything.

Hello,
Sounds like a DNS issue.

Fixed the issue. I used the Huawei Modem Terminal to connect to the modem at the COM port listed in the modem's properties in device manager.

Nothing a little electrical tape can't fix right, LOL. That or if you have it handy the self fusing tape would be optimal. Ultimately not that big of a deal I wouldn't think.

Great photos from the filings. Looks like there are four internal antennas labeled “5G.” But getting to them may be a bit of a challenge! 2B56DBF7-3331-4742-B0C9-A868D9BA9B0A.jpeg 21B110F3-B3FC-40C0-BE96-9858E5CEEEDE.jpeg 0FC4351B-7AD0-4315-B90C-17169CBFD201.jpeg 43FF1CD7-35DF-4A2C-9DCA-622023C0568F...

This is my setup on the AirMaster before and after swapping the T-mobile SIM card. I only changed settings on one page: LTE -> Bearer Settings, see final image.

IMG_6378.PNG

IMG_6379.PNG

IMG_6380.PNG

IMG_6381.PNG

IMG_6382.PNG

IMG_6383.PNG

IMG_6392.PNG

IMG_6393.PNG

Click on global Network options, the ipv6 prefix is there. If it is blank, you're good. If not, delete it and save. Imei = modem identity. If you are using fast.t-mobile.com as an APN you shouldn't need to do anything else other than make all of your AT+CGDCONT entries be IPV4 only AND set the Mode...

I've been looking real close at the t99w175 modem and it's variations. some new 5g modems like sierras require voltage on pin 20 of the m.2 interface, if this is not present, the modem will operate in PCIe mode. There is no command to change this. a variation of this modem made by Thales as the MV31...

We freakin' did it! ttyUSB3 was the answer. The stupid part is, I actually tried USB0, 1, and 2 (because those are the only ones I've seen in the AT commands so far...). When 1 and 2 just returned errors, I went back to 0. So in the end: Putty, SSH to router IP Log in with admin credentials picocom ...

Guys this is not my personal sales thread, if it turns into that this thread will likely be closed or removed, my contact info is on my profile page or on mifis.us
pls don't clutter this thread up with contact requests

I gave up on the OutDoorRouter EZR30 (mostly since it only had a 100mb ethernet...) But I have re-purposed the nice outdoor case and bulkhead N-female to SMA antenna connections. I pulled the board and replaced it with a Mikrotik RB11G running ROOter. so now it's an 'OutDoorROOter' https://flic.kr/p...

Get rid of any antenna cable, mount the modem in the router w/o metal case only the routers board inside the antenna. I welded a box out of flat steel from truck bed side big enough to mount the router board in it and be water tight them made a mount on top for antenna to mount to. I cut the ends of...

SOLVED. I finally got this to work after calling Inseego tech. support. They were very helpful, and stepped me through it. First, an Inseego support tech sent me the correct update file. Then, I needed to go to the dongle's web interface page for local updates: 192.168.2.1/sideload Once there, you c...

Circling back around here, after a few months of usage with the new firmware, and I have to say: GOD DAMN my connection is rock solid now! Thank you thank you!

I have now managed to get OpenMPTCProuter working with Starlink and my LTE connection AND maintain domestic peace. At this time all of our current streaming and social media needs are being met. To do this I had to use the latest snapshot builds of OpenMPTCProuter and the latest matching VPS script....

Yes as I'm new to using the LTE18 I'm still trying to figure out what all I can see and change in the GUI. Have not found bands and usage of them if it even shows me. I do like the Cudy router though. Straight forward set up and simple turn up.

I may have just bricked my new Nexp1Go router. Messing with some settings, I disabled the 2.4ghz wifi signal. This somehow made my 5G also inoperable. My devices can see the 5G but not 2.4G. I try to connect to the 5G but get the error "Cannot receive i.p address" This means I cannot acce...

Scratch that, I have pulled up the recovery mode screen. I needed to incognito

Yup won't make that mistake again. Nexp1go back up and operational! Flash successful! Thank you all

I've had zero issues with the new t-mobile SIMs in four custom devices (not all mine, I help out neighbors). They are all using quectel modems. I put the new sim in the hotspot that was sent with the sim and let it activate, then with then with the quectel modems I matched device identities, set APN...

I just received my CALYX T-Mobile Franklin T-10 replacement yesterday for my Sprint Franklin 910. The Sprint Franklin 910 was going weird on me--slower speeds, long website connect times--so I was glad to get the replacement. Ugh! It connected and worked fairly quickly but the point-of-presence on t...

My network has been running well for such a long time that I don't look at these forums as much, but this is something I have been wanting to do for a while. I use Rooter for my RPi4 but I have always wanted to make my own, thanks for posting this.

I dont think you need to build QFirehose for a specific firmware, just the cpu of your modem. Dairyman just added latest version of qfirehose for all the builds, so you can get it, whit ROOter 19 or ROOter 21 version. you could grab the binary inside it, and you on your own router thecnically, or ju...

Ok, heres an update it seems that T-Mobile implemented all IPv6 provisioning with 464xlat. whish may be what have cause my issue since i was not getting an IPV4 Address, and only IPV6. But the router is now working and i have internet access again. Last night around 11pm, it started working again. I...

Definitely not antenna related at this point but I wanted to note this since I brought it up earlier.. "extended temperature range" seems to be why I have so much latency on these further towers. On the quectels, 60c is considered "normal temperature range", 60-75 is considered &...

Thanks! That is what I figured, I've used the EM7455 and EM7565 pretty extensively with few issues. The Telit has been great too, but I've struggled more with the AT Commands for it and understanding how to configure it. Guess I'll give the 9191 a go... wish me luck.

Thanks again!

Thank you for the link. That was very interesting and seemed to do the trick. I did notice that it seemed to create a 3rd PDP context with IPv4v6 but the first context was changed as intended. So far the connection has been solid for the past 20 hours or so. Thank you so much for your help. If it wa...

I'm back on the network with the 7960 in the 5500!!! Thanks so much!!!!! Turns out it recognized it in either slot and I'm just slow.

Still no word from Canada.... 'll be taking my business to wireless Haven in the future.

Have a nice evening!

A note for people using any lte modem with custom lte connection scripts on casual Linux distributions. After upgrading my Ubuntu 20.04 suddenly I had all sort of issue with the at commend serial interface. Minicom hang during the session , output of at commands was truncated e.t.c. I got suspicious...

I've run that Cradlepoint on VZ. If you can buy / borrow a cheap VZ hotspot, then get a sim for it, and then sim swap to the Cradlepoint. It will work just fine.

I've run that Cradlepoint on VZ. If you can buy / borrow a cheap VZ hotspot, then get a sim for it, and then sim swap to the Cradlepoint. It will work just fine. yeah the ol, pop in cell phone first always works to get those sims going. with visible, and I believe cricket you need a new mvoip or so...

Sorry for the delay. I was able to get the firmware flash tool running natively on the MOFI 5500. I had to use an emulator to run Debian on MIPSEL arch and was able to compile my own version that worked on MIPSEL which is what the router runs on. It makes some progress but fails with the following m...

For the record, I solved the problem for others who might encounter it. The OnePlus Nord N200 5G phone has a software issue that prevents the APN settings from being saved. You think you are making the changes, but when you click save certain critical fields revert to defaults. The solution I used w...

Here is an update on my Calyx wireless service with my new Inseego MiFi M2000. Unit received May 17th and activated that evening. M2000 needed a Firmware upgrade. That Upgrade eliminated my ability to change or see what T-Mobile APN I'm using. M2000 connected to the T-Mobile 5G service according to ...

So how would I set it up on the Cudy? If you do not have prior experience with VPN I am not convinced this is the time to start. There are costs, both the learning and the $$ (if any) of the service. I could be off-base here, but I think you could achieve much the same thing by setting up Tor brows...

Guys is tmobile home internet is good for gaming and live stream? It could, it depends on your tower. Would need to try, it's a low risk only cost $50 a month to try. No hardware to buy! Other options would be wait for StarLink or build a modem and try to get a data plan/SIM to work. Would need to ...

Thanks all, I deliberately attempted to abandon this thread once I knew what was involved with IMEI repair. But well, it looks like it grew anyway. @radec: Yes Quectel Modems are dead simple, indeed atrociously easy, to make "repairs on the IMEI with." So much so, that I was considering bu...

JimHelms wrote: ↑Tue Jun 14, 2022 7:14 am @Mansour449

Please read the RULES as it relates to links to images, and correct accordingly.

Done. I'm sorry, I didn't read that before posting.

Best Regards,

Oh my gosh thanks for the information. I believe I just have to figure out how to make the LT 18 look like the the phone. Enter the correct AT command after accessing them at gcom/atcmd. I will get the SIM and give it a try. Thank you!!

I've gotten system-wide TTL mangle rules to work on stock rooted OxygenOS 12, oddly enough, but not on any other custom ROMs or kernels. However, there are some custom ROMs, Havoc and/or Evolution X (can't remember if it's both or just one of them), which allow tethering through a VPN on the device,...

I know this is very late but I had the same issue and found a fix so I'm posting this for someone else who might have the same problem. put this in system>startup>local startup before "exit 0" echo 7 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio7/direction echo 1 > /sys/class/gp...

My resolution for this issue was to take it slower and do a manual reboot instead of a software reboot. 1. Set the APN 2. Wait 1+ minute 3. Remove power 4. Insert SIM 5. Wait 1+ minute 6. Insert power 7. Wait up to 5 minutes I found that this allowed me to connect consistently to Verizon and AT&...

Here are instructions compiled

@vahnwinkle Quectel Modem update using router instead of EVB. Didneywhorl I followed all of your instruction and successfully updated my modem firmware. For those of you looking to update your modem firmware for troubleshooting or fixing issues related to your modem or internet problems, I highly r...

@vahnwinkle I gotchu. Get winSCP and putty if you don't have both apps for Windows : https://www.ofmodemsandmen.com/winscp.html (Im not much for Mac so if you use mac, find equivalents and adapt the instructions for your OS. Get the appropriate modem firmware update and unzip it somewhere you will ...

I haven't run into any issues loading FW tbh, I wish I knew what to tell you to help. I just used this script that I found in the store documentation. cd /D "%~dp0" fdt2.exe -d g5k -ignswto -prto 120 -resettimeout 3 -timeout 15 -f SWIX55C_03.09.06.00-001.cwe SWIX55C_03.09.06.00-001_TMO_030...

You have to manually set your IP on your PC to your newer subnet (turn DHCP off) and access the GUI before the time runs out or the changes won't take. With that said I never have been able to get this to work well. I have better luck setting a static route in the WG1608 to the down stream router an...

Hi! Let me preface this by saying I’m not extremely tech savvy, but I want to learn. Have a wireless LTE internet modem/router directly from AT&T. I live in a very rural area that is serviced by AT&T who has a cell site in my town. Roughly a week ago speeds tanked and will not get over 2/3 ...

One thing I don’t understand about LTE is can AT&T share the exact same frequency as say T-Mobile? For example they both have Band2(700MHz) do they have Carrier specific frequencies within that band? Not sure of the correct terminology, but I ask because the Wilson Pro-type meters let you selec...

I slapped together a test app that's meant to allow rooted users to control their ipv4 address/subnet while tethering/hotspotting. If it works or not for your device, I'd appreciate any feedback. https://drive.google.com/file/d/1WzMx9n62dlBhkK_qJDzpCZ6O1gufW8N4/view?usp=sharing Source is here, but a...

Hi, and sorry for the late reply. I thought I had but now I'm not sure. I have a Samsung with 5G (M23) that with the same card informs in bars icon that 5G is connected. However, I installed an app that informs which frequency and band I'm connected with, and it says B1, which is 4G in my country.

Came back to find information on how I made this work. I should have posted a followup. Basically, after I got this all set up, I realized that there's no legit way to get an unlimited data plan on AT&T or Verizon. Sprint/T-Mobile has no tower anywhere close to me. Starlink put a nail in this pr...

So I tethered a phone to the router for hours with no issue. So some how visible can now detect you are using a router modem IMEI. This is the issue now with visible. Just to share the information.

Hello, Have a NEXQ6GO set up for Page Plus with the following updates: Updated APN, and verified that IMEI is compatible with Page Plus service. With these settings the unit I have is working as it should. My sister was impressed with the unit and asked if I could get one set up for her as well. Usi...

Only have the modem that does not work with me. The other is up at our weekend property. Let me get back to you on this.

Didneywhorl wrote: ↑Mon Aug 15, 2022 1:54 pm Then run...
Code: Select all
AT+QCFG="USBNET",2
then
Code: Select all
AT+CFUN=1,1
then reboot the router.

Looks like that fixed the issue. thanks for your help!

I did exceed the 200 GB last month. The speed was variable after reaching 200 GB. At times it was less than 5 MB/sec and at other times it was my normal speed of around 12 MB/sec foe me. It might have been related to tower activity. My general conclusion was that reaching the 200 GB did not make the...

I'm 0.67 miles from mine, getting 500mbps average.

I got it working! PDP-Ipv4-to-Ipv6 selected!
also i was missing /firewall-start.sh
# IPv4 TTL mod
iptables -w -t mangle -C POSTROUTING -o wwan0 -j TTL --ttl-set 66 - reboot and yeah all if super nice!! all sites opening no problem!!! thank you!!

Hello i got my ORBI i fallow the steps Orbi Megatread HUGE thanks to hazarjast(you make me believe!!! i bout this amazing product ORBI)!!! i did it all successfully installed Voxel Router Firmware Version (Voxel) V9.2.5.2.32SF-HW - magic repaired MEID of my Moto G look good(Visible work my my Moto p...

After a little more trial and error, I realized that the auto-created CLAT1 device needed to have the "lan" firewall zone. But since the device only appears when the modem connects, and the UI "edit" doesn't allow for setting the firewall zone, I just modified the /etc/config/fir...

The outgoing connection is CGNAT with some tricks. If you are not internet savvy, the ATT plans aren't the best to try and self host. Yes, you can self host using these ATT plans but they take different traffic routes - which is where the tricks come into play so there's a lot of work that needs to ...

The outgoing connection is CGNAT with some tricks. If you are not internet savvy, the ATT plans aren't the best to try and self host. Yes, you can self host using these ATT plans but they take different traffic routes - which is where the tricks come into play so there's a lot of work that needs to...

Today I found a command to display information about primary and secondary serving cells. I think this gives current information about carrier aggregation. echo -ne "AT+QNETINFO=\"servingcell\"\r\n" | microcom -X -t 1000 /dev/ttyUSB2 Command is described on p. 82 of the manual.

Correction, it doesn't look like applying the zone of 'lan' made the difference. All that was needed was a firewall restart after the modem connects. I now have a start up script that auto reconnects firewall after 5 minutes from boot.

I did not see this thread anywhere so here it is, a general thread for the MR6400 Please add to this anything about this device you wish. I just got to have a look at this device today (remotely) it is similar to the M5. Here are the hardware id's for it modem USB\VID_0846&PID_68E2&REV_0504&...

MR6400 Partitions by name mtd0: 00280000 00040000 "sbl" mtd1: 00280000 00040000 "mibib" mtd2: 01680000 00040000 "efs2" mtd3: 001c0000 00040000 "tz" mtd4: 00100000 00040000 "tz_devcfg" mtd5: 00180000 00040000 "ddr" mtd6: 00100000 00040000 &q...

The easy way to have something happen after the modem has connected is to add the command to /usr/lib/rooter/connect/postconnect.sh.

In this case add, at the end of the file

/etc/init.d/firewall reload

to restart the firewall after the modem connects.

@Didneywhorl yah it's just /etc/init.d/firewall restart in the startup script area,

@Dairydude thanks, that's a better solution!

Latest version firmware. 2022-03-23a.

I finally splashed out on a Cudy LT18 and the NEXP1GO is now relegated to being a spare router / modem. It had a handful of problems. None of them showstoppers but a source of frustration.

Search found more than 1363 matches