Wireless Joint

Canuck wrote: Tue Mar 12, 2024 2:05 pm @hazarjast Is there anyway to have this firmware modified/working for LBR20 Bell Canada version? It's a different model: LBR20-1BNCNS
https://www.netgear.com/support/product/lbr20-1bncns
I'll appreciate it .

I am not the author of Voxel firmware but you may be able to reach him over on the SnB forums: https://www.snbforums.com/threads/custo ... -hw.88721/

i watch the video posted by "Never Enought Rally" and installed everything needed for the hotspot to function. however on verizon changing the ttl doesn't seem to switch the data from hotspot to regular traffic...hazarjast can you help me out please

Did anyone had a success to separate 2.4Ghz and 5Ghz SSIDs? I follow the guide but it doesn't get separated. Still have the same SSID

@hazarjast Thanks for the great work. I was able to get everything to work with ATT but cannot get T-mobile to work. I believe I've got the TTL settings right according to the video they check out to be setup right. I would appreciate any help on this issue. My computer and the router show internet and connected but cannot move data.

Router Firmware Version (Voxel)
V9.2.5.2.38SF-HW
LTE Modem firmware tried A05 and now on A06

Thanks in advance!!

@chadot88 For starters:
Which T-mobile plan?
Did you set the APN?
What does the LTE connection screen show for signal, etc?
Did you try different PDP Type settings like PDP-IPv4v6 ?

Which T-mobile plan? I have tried a cell plan with a Samsung s20 IMEI and the tablet plan with a tablet IMEI, same results.

Did you set the APN? fast.t-moble.com

What does the LTE connection screen show for signal, etc?full signal, I am about a 1\2 mile from the tower. Get 600+ on my cell.

Did you try different PDP Type settings like PDP-IPv4v6 ? I did try just ipv4 and ipv4v6 no difference.

Note, it did connect and give me internet one time. The sims work fine in a phone and table or mr6500.