Wireless Joint

Strange times--to say the least.

There is little doubt that Starlink has changed the arena for internet service. They have also partnered with T-Mobile. Since a lot of members/people are now taking advantage of using satellite service, we felt a forum should be included to accommodate these additions.

I personally have no ...

This is a NEW forum to provide a space where members can share their custom projects and builds. The type and content matter of these builds can include subjects related to Rural and Remote locations, RV's, Marine, Technology, Recreational, and a multitude of other subjects.

Have a question as to ...

birdog wrote: Thu Dec 19, 2024 11:47 am Thanks everyone for your help. I have a few questions regarding the cell tower survey. How do I determine my exact gps coordinate for a cell tower survey?

You can use Google Earth for coordinates. They are located on the bottom, right hand corner of the screen (unless something has changed).

It may be worth removing the modems and placing each in a USB sled and use a PC to check each to make sure they are working. At that time you may want to update the modem firmware to the latest and configure the modem composition that MoFi uses (i.e., QMI, MBIM).

Unfortunately, there are times one ...

If the router was working fine and would recognize both modems "prior" to the upgrade, then the new firmware seems to be the contributing factor. And, while I am not very familiar with their firmware and/or update process:

1. "if" the new firmware is of a different kernel, and
2. "if" the firmware ...

With the modem inside the antenna do I run an ethernet cable into the router inside the mobile home?

Yes, the modem will be powered via PoE (Power over Ethernet). This also means you need to send power through the ethernet cable from the inside (close to the router) to the modem. This requires ...

You can use one of THESE methods to restore the router firmware.

BillA wrote: Tue Mar 19, 2024 6:06 pm
Oh, I see the 5 commands, but doesn't it require a calculated code too, or am I missing something silly here? heh

Not sure what calculated code you are referring to. It does not require the same unlock (and generate a code) technique as the earlier Sierra models.

5, plugged back into ROOer, everything reads right. back to figuring out the rest of the problems haha

thanks again, this project would have died if i had to buy a new card.

Not a problem. Glad you are back up and running.

I need to update the script when time permits. I started a new one a ...

BillA wrote: Tue Mar 19, 2024 2:59 pm
Do you need to send the authorization before those commands, or this will only restore the original imei?

The authorization is included the first AT command. It joins 5 different AT commands into one.

Yeah, the EM919X modems can be a little finicky at times.

I would just use putty (without using the script) to access the modem and run the following commands:

AT!ENTERCND="A710";!IMAGE=0,0;!IMAGE=0,1;!IMAGE=0;!NVRESTORE=0

then, using the command below, substituting the 12,34,..... with your ...

Why would you not refer to their DOCUMENTATION.

Discover the power of simplicity and speed with the InvisaGig 5G Wireless Internet System. We consider InvisaGig to be the game changer for cellular connectivity.

What is InvisaGig ?

InvisaGig is an easy-to-use connectivity platform, NOT another router. Designed to work seamlessly with your ...

To assist our members with updating the firmware and/or repairing the IMEI on the EM9191 and EM9190, I put together a kit to help simplify the process.

The kit contains a script along with a collection of the firmware it uses. As with any information on this forum, use at your own risk.

Download ...

To assist our members with updating the firmware and/or repairing the IMEI on the EM9191 and EM9190, I put together a kit to help simplify the process.

The kit contains a script along with a collection of the firmware it uses. As with any information on this forum, use at your own risk.

Download ...

After using the at!nvrestore=0 command, you will need to update the modem's firmware.

This may be of help:

It is thought that some carriers are retrieving and checking that the IMEI of a device also matches the serial number assigned to that device. The serial number on some of the modems may be updated must like the IMEI.

IMEI is only half the equation. You will also need to change the TTL value.

From my experience and unless something has changed, Verizon requires to a TTL of 65 or 117.

Not familiar with the process of changing the TTL on the MR5200--but I feel certain another member can share directions.

The MC7411 does need to be placed in QMI composition to be recognized by the Cradlepoint. No other changes are necessary.

Note that it uses the same AT command as the EM7565:

Code: Select all

at!usbcomp=1,3,10D

Adm1jtg wrote: Tue Dec 20, 2022 9:31 pm
JimHelms wrote: Tue Dec 20, 2022 9:07 am SPLASH PAGE UPDATED.
Is there a way to implement the new splash page/stats page into my current build which is Wifix branded:
GoldenOrb_2020-05-16
Anything newer just doesnt seem to work as well for me.

The version I uploaded today should work on a 2020 build.

SPLASH PAGE UPDATED.

Just updated the Tutorial with a newer version you can try.

To use the EP06 on a PC, it must have a Mini PCI-E modem slot to install the modem.

Otherwise, you will need to purchase a USB to Mini PCI-E modem adapter enclosure with a SIM card slot.

USB to Mini PCI-E Modem Enclosure with SIM Card Slotjpg.jpg

You will then need to install the Quectel ...

@Rich Hathaway
@Didneywhorl

Done!

Along with a common respect we hold for the work of all content creators who choose to post and share their work on the Wireless Joint forum, we are hosted and owned by US entities. Thus, we remind all users of the Wireless Joint forum that copyright to the author for any work published herein is ...

@john659

Please review the RULES for posting as it relates to links to images, and correct accordingly.

Have you tried using the B2B.tmobile.com APN?

@beatunc

You may want to remove all of your personal information from your post (i.e.,, IMEI, SIM ICCID, Phone Number....)

According to T-Mobile:

Sprint’s LTE network will be retired on June 30, 2022. The good news is most Sprint LTE and 5G devices are compatible with the T-Mobile LTE or 5G network and will continue to operate on T-Mobile's LTE and 5G networks. Customers only need to take a few easy steps:

Replace ...

Andy_t wrote: Tue Jun 21, 2022 6:59 pm
I use a sprint sim

That may well be your issue as they are terminating Sprint service on most of the towers as everything changes over to T-Mobile.

@Mansour449

Please read the RULES as it relates to links to images, and correct accordingly.

Probably the easiest method is to see if there is a ROOTer/GoldenOrb build for your Linksys router. If so, install it on your router and set the Custom Firewall TTL's settings to 65.

In the alternative, you may try using a prepaid iPad unlimited ($20) plan which requires no TTL's--although at some ...

@packlet

packlet wrote: Mon May 30, 2022 4:08 am Got it working, with some input from the dev (YSurac). https://flic.kr/p/2noLzyr

Please read the rules regarding posting links to images....

Thanks Jim for the quick reply. Great to know about the bare bones option since I wouldn't need the modem.
I will probably upgrade to the new sled and EM9191 from Wireless Haven once the new Calyx SIM is working reliably. If I get the EM9191 with a reliable 5G signal, will I be limited by the ...

Question though...is it typical to lose a LAN port through a lightning strike?

Yes, and unfortunately, it is not uncommon.

There is probably only a single resister or diode blown, but it may be easier and cheaper just to pick up another CBA850.

In the alternative, you could use a GB PoE ...

I believe the MR5200 uses:

Code: Select all

SDX55

Can't help you much beyond that.

The Turris Omnia is actually a stable unit that we use to carry on the LTEFIX store. We also had a GoldenOrb build for it.

The only downside is the Mini PCI-E slot will only recognize a modem when it is placed in USB2.0 mode .

There is a standard GoldenOrb build available for the Omnia that can be ...

May try disabling IPV6 and use IPV4 only.

If you are using WiFiX/ROOter/GoldenOrb firmware, go to MODEM>CONNECTION PROFILE DEFAULT PROFILE > PROTOCOL TYPE > IPV4

SAVE & APPLY, and reboot the router.

You may try the latest WiFiX firmware.

packlet wrote: Thu Apr 14, 2022 1:58 pm so now it's an 'OutDoorROOter' https://flic.kr/p/2n4MU9r

@packlet

Please refer to our Rules pertaining to Images and Photos...

Someone please delete this post because obviously it's falling on deaf ears and nobody wants to help and that's fuckin fine

Your question is rather vague. Try rephrasing your question to provide more details pertaining to your issue--such as the device and its firmware and the model of the ...

Sorry for the delay in responding -- I don't seem to be getting notifications about this thread anymore. Probably something to do with the website name change.

You will need to update your NOTIFICATION settings.

Just wanted to update for everyone since I cannot find anyone else that has transitioned an AirMaster 4000D device to T-mobile Sim... I used Jim's advice on changing the APN as well as Didneywhorl to change APN type to IPv4 on this post . That's all that was needed for me to get everything back ...

Does your version of WiFiX firmware not have the SMS tab?

If not, you may need to upgrade to a newer version.

SMS Messaging.png

Might also take a look at VLAN configurations.

Couldn’t we just create a domain mask/redirect on our own personal domain and have it forward to fast.t-mobile.com APN then enter our own URL in the APN field to avoid the hyphen. Would that work?

Not sure how all of that would work. Never hurts to try.

Please read THIS and post accordingly.

Please read THIS NOTICE on how and where to post a topic, and move your topic to its proper forum.

See THIS post

Hey Jim thanks for the reply! I was wondering if there was any update with you on the completion of your remote gate opener, I've been procrastinating for a while now and was wondering if I should finally get around to finishing this project.

I have not had the time to work on the project and ...

I've not used the Sprint hotspot since I got the AirMaster 4000D for use on Sprint Band 41.

Any idea if this device is going to work with the new SIM card?

Depends on what they ultimately decide to do with Band 41.

I would certainly try it. I would follow this TUTORIAL in changing the ...

See link for car power for modem
https://www.amazon.com/MoFi-MOFI4500-Router-MOFI4500-4GXeLTE-SIM4-Power/dp/B06ZY7WH99/ref=sr_1_1?crid=TDW5C5DO5P47&keywords=mofi+4500+power+cord+car&qid=1644151499&sprefix=mofi+4500+power+cord+car%2Caps%2C106&sr=8-1

These power adapters work really well for ...

Windows 7 was a fantastic os for developers as far as windows goes ....

I ran Windows 7 on my PC's until they were no longer supported, then reluctantly upgraded my work machines to Windows 10.

I do have a Windows 7 machine that is used strictly for flashing modems, tftp projects, and other ...

@Cassiel007 You will notice I renamed the subject for your post. Please read this announcement prior to posting another topic.

I prefer mimo from two antennas instead of two in one like this.

Yes, I completely understand the preference for two separate SISO antennas to achieve MIMO. We normally stock this Wide Band Omni Antenna but they are currently on back order. They have N Female connectors on bottom of the ...

I do personally have that antenna which is mounted on top of my camper.

I also like (and personally use) the EM7411 in a NEXR5GO router with T-Mobile and, while not a speed demon, does provide enough bandwidth to serve its purpose.

EM7411 Signal Stats.png

Speed Test Camper.png

You may want to give one of these 2x2 MIMO Omni Antennas a try. They do cover the 600MHz to 3800MHz frequency range.

600-3800Mhz 2x2 MIMO 5G Ready 6dBi Omni-Directional Antenna.png

SEARCH FUNCTION:

PRIOR to posting a new topic, please assure the subject content for a particular device and/or issue has not previously been posted and/or discussed. If so, your post should be a continuation under that Topic. The search function should ALWAYS be used for this purpose PRIOR to ...

Does your firmware version include the Custom Ping Test in the menu?

If so, try enabling the option with Test Type set to Page Retrieval.

CustomPingTest.png

Note, that when using the Custom Ping Test, Connection Monitor should be disabled if you are using it.

When the Ping fails, and ...

I am working on a similar project only for a remote gate opener that I will share when completed.

I have a wireless key pad on a pedestal with a ring door bell mounted next to it. Ideally, I would like to be able to open the gate remotely with some device. The gate is a good distance (1/4 mile ...

bjames Great work and certainly food for thought.

I will provide my thoughts on this project as well as links to the build components for convenience.

I have always considered mounting the base station in an external outdoor enclosure to better reach a few of my cameras. I was planning to leave ...

Attached are some documents that provide pictures of the VERIZON INTERNET GATEWAY ASK-NCQ1338 as well as the user manuals.

EXTERNAL PHOTOS
External-Photos-5201969.pdf

INTERNAL PHOTOS 1
Internal-Photos-1-5201972.pdf

INTERNAL PHOTOS 2
Internal-Photos-2-5202084.pdf

USER MANUAL:

verizon ...

I'm not sure what is wrong with this forum. I keeps deleting my Darn Post.

I feel your pain. This has bit me in the ass many times. Basically if you take too long typing a response then you get signed out and when you submit you lose what you have typed. I got in the habit of copying all ...

We have set up a forum for VPN issues. Until we can get those topics transferred over, a search for OpenVPN will bring up some information.

@dbshelton

Did anyone mention whether the Mikrotik RB750Gr3 is equipped with USB2 or a USB3 port?

Have you tried power cycling the modem without having to reboot the router:

Code: Select all

AT+CFUN=1,1

... please give an overview as to the advantages of this type of setup versus just running an antenna cable (s) into the house. Either performance wise or convenience wise or otherwise?.

The advantages of this setup:

Since there are no antenna cables you eliminate the loss associated with the ...

Can you connect the phone to the router and SSH into the router using putty and run the following command:

ifconfig -a

Need to see what interface is being assigned to the USB phone. Look for the interface that shows IPV4 and IPV6 addresses.

I do not have a gi.net to test but, and looking at ...

hydrocynus

I updated the rules above to cover the IPV6 tables (which I just noticed did not get copied on my original post).

Another way to write the rules which makes it easier to modify the Interface being used and the TTL assigned to that interface:

#INTERNAL MODEM 1:
INTERFACE1 = wwan0 ...

The rules below assumes the USB interface is assigned usb0 (which is common for tethering).

The rules also cover use of an internal modem where the WAN1 interface is assigned wwan0.

Adjust the ttl-set # to your desired TTL

#startTTL
iptables -t mangle -I POSTROUTING -o wwan0 -j TTL --ttl-set 65 ...

Try the search option for "LBR20" and it will return the MegaThread.

The initial issue is that you are trying to upload a .zip file.

You will need to extract it and upload the .bin file that is compressed within the .zip file.

Note that the Wilson antennas cover the 700-2700 MHz range, which excludes the 600MHz necessary for Band 71 and bands above the 2700MHz

Compare them to THESE or to THESE.

Search found 1351 matches